Accora Configura Advance SC3, Инструкция по эксплуатации

Страница: 11 / 20

11
Note:
After any of these adjustments a functionality
check must be carried out (See section 11).
8. Footplate operation & adjustment
The Configura Advance chair is supplied with a
removeable angle adjustable footplate. The footplate
has 3 angle settings: 90°, 105°and 120°.
The height adjustment system of the footplate is
separate from the footplate removal
– for details on
how to adjust the footplate height refer to section 9 of
this manual. The footplate may be fitted, removed
and adjusted with the patient in the chair. Ensure the
patient is sitting securely and cannot slide out.
Operation – Fitting the Footplate
1. Ensure that the plungers that secure the footplate
(Fig 21, Items 1&2) are in the closed position (Fig
23).
2. Take the footplate (Fig 24) and insert the two
tapered spigots (Fig 24, Items 1&2) into the two
sockets either side of the footplate height
adjustment frame (Fig 21, Items 3&4). Push the
footplate into the tubes until the plungers latch
with an audible click.
3. Ensure the plungers are latched by moving the
footplate in and out slightly.
Operation - Removing the Footplate
1. Locate the plungers that secure the footplate
either side of the leg rest, at the bottom of the
footplate height adjustment frame (Fig 21, Items
1&2).
2. Turn the levers on the two plungers towards the
front of the chair until they latch. The lever arm
plungers are now locked in the open position.
(Fig 22).
3. Pull the footplate out.
Figure 20 – Actuator mounting
WARNING
Always engage the castor brakes when the
chair is stationery or left unattended.
Ensure the patient is in a stable sitting position
while the footplate is adjusted, fitted or
removed.
1
2
Figure 21
3 4
Figure 22 – Plunger Open Figure 23 – Plunger Closed
1
2
Figure 24
Low seat
height position
High seat
height position