9
Chair Depth adjustment
1.
Make sure a patient is not in the chair.
2.
Make sure the brakes on all 3 locking castors are
locked on (See section 13).
3.
At the back of the chair, under the seat on the left-
hand side, locate the depth adjustment lever (Fig
13, Item 1)
4.
Turn the lever clockwise to release the backrest
slide mechanism and move the backrest to the
desired measurement with the other hand. The
depth setting can be read off the scale on the
back part of the seat frame (Fig 14, Item 1).
Figure 13
5.
Release the depth adjustment lever and move the
backrest in and out slightly to ensure the locking
mechanism has engaged.
Armrest height adjustment
1.
Make sure a patient is not in the chair.
2.
Undo the hand screw and sidepiece locking
plunger (Figure 8).
3.
Pull the sidepiece from the chair seat frame, undo
the screws (Figure 15) from the fixing bars.
Figure 15
4.
Locate the fixing bars to the desired position for
armrest height, secure the fixing bars with screws.
Refer to Figure 15 for armrest height position and
fixing bar location.
5.
Fit the sidepieces to the chair. Pull and rotate the
locking plunger to lock the fixing bar and tighten
the hand screws.
Footplate Height adjustment
1.
Make sure a patient is not in the chair.
2.
Make sure the brakes on all 3 locking castors are
locked on (See section 13).
3.
Locate the footplate height adjustment plungers
on either side of the leg rest (Fig 16, Items 1&2).
4.
Pull and hold the caps of the two plungers to
release the footplate height frame and move the
footplate to the desired height measurement. The
Figure 12
Figure 14
1
1
8”
6.5
”
9
”
