User’s Manual
3
4. DMX OUT: 3-pin
& 5-pin female XLR sockets.
4 Operation Guide
This unit has a 4
×
20 characters
LCD
window, it is convenient for user to operate this unit.
User can rotate the
multi-selector
gently to enter relevant function modes or to achieve desired
settings. Rotating the multi-selector clockwise can select further menu or increase relevant value,
while rotating the multi-selector anti-clockwise can select the previous menu or decrease relevant
value. Pressing the multi-selector can enter the selected menu or confirm your setting.
This unit can be powered by the
built-in chargeable battery
or a DC 9-24V adapter. The battery is
charged automatically when using an adapter for power supply. Charging the battery fully needs 3-5
hours or so, and the battery can supply the unit for almost 6-8 hours.
*NOTE: For your convenient control of the connected LED product, user should firstly set
relevant “Unit Number” and “Unit Group” for the connected LED product in the “Setup With
Answer” function mode. If the connected LED units are no more than 1000 pcs, we recommend
you to set the Unit Numbers in the same Group for convenient application (See the “Setup
With Answer” operation guide for details).
Turn on the power switch at the backside of this unit, the XB-R1 will be powered on and the LCD will
show you the first display:
Press the multi-selector to enter the next display page, LCD will show you the main menu of function
modes as below:
User can rotate the multi-selector to select desired item, then press the multi-selector to enter your
selected function mode. User can also move the flashing cursor to the top-left corner, and then press
the multi-selector to return to the previous display page.
<
Setup No Answer
>
Setup With Answer
>
DMX Controller
>
LCD Backlight:xxxx
>
Setup Controller For
LED Series Product
REV1.60
Copy Right @2005
>
