User’s Manual
10
Auto Fadetime:
0%-100%.
Select the “Confirm” item and press the multi-selector, LCD will show you the above display.
(When adjusting relevant parameters, the being-controlled LEDs will respond sensitively.
The LEDs will briefly flash for several seconds during data sending.)
(3) MANUAL Work Mode:
If you set the Work Mode as “MANUAL”, the LCD-display will immediately show you as below:
You can rotate the multi-selector clockwise or anticlockwise to select relevant item, then use the
multi-selector to set or confirm your setting.
In the
MANUAL Work Mode
, relevant parameters are as below:
Unit Group: 1-100.
Unit Number: 1~999
Blue/Duration:
0%-100%
Red /Speed:
0%-100%
Green/Dimmer:
0%-100%
Select the “Confirm” item and press the multi-selector, LCD will show you the above display.
(When adjusting relevant parameters, the being-controlled LEDs will respond sensitively.
The LEDs will briefly flash for several seconds during data sending.)
↑
Auto Program:
xxx
>
Auto Speed:
xxx
>
Auto Fadetime:
xxx
%
>
Confirm to send
>
↑
Blue/Duration:
XXX
%
>
Red /Speed:
XXX
%
>
Green/Dimmer:
XXX
%
>
Confirm to send
>
Setup With Answer
LED Unit Setup
Data Sending
！
Please Wait…
<
ID:
XXX…
>
Unit Group:
XXX
>
Unit Number:
XXX
>
↓
Work Mode:MANUAL
>
↑
Blue/Duration:
XXX
%
>
Red/Speed:
XXX
%
>
Green/Dimmer:
XXX
%
>
Confirm to send
>
Setup With Answer
LED Unit Setup
Data Sending
！
Please Wait…
