background image

2

www.acclaimlighting.com

INTRODUCTION

WELCOME

Welcome to the Terra Linear™ range from Acclaim Lighting. These tough, drive-over ready 
fixtures designed for all-weather in-ground applications. Available in 1 foot and 4 foot 
lengths, these aluminum-bodied IP68 fixtures are particularly suited to recessed façade 
lighting applications. A wide range of emitter, beam angle and power options make it 
straightforward to match each unit to the specific requirements of your installation. 
Using unified power and DMX control links, Terra Linear fixtures can be rapidly daisy-chained 
in long runs. All standard mains voltages are directly supported or, to achieve impressive 
single runs up to 700 linear feet (213m), Terra Linear can be driven by Acclaim Lighting’s XTR 
Driver. 
Control is achieved using the industry standard DMX-512A format, with RDM for 
configuration. DALI and 0-10V control inputs can also be used when an XTR Driver or 
optional converters are employed. 

SAFETY

 

When fixtures are mounted off-ground, ensure they are securely fitted to an appropriate 
mounting surface.  

 

Ensure that the power input is supplied from an environmentally protected location, is 
correctly fused and has a 

valid protective earth that is tied to true earth

.

WARNING - HIGH VOLTAGE

 

This device can use high voltages (up to 400VDC) which could 

cause severe personal injury or death if misused:

 • Always

 isolate power before connecting or disconnecting links.

 

Installation to be carried out by 

certified electricians

 only. 

 

Use only 

approved

 cables and connectors.

 

Check all connections are correctly made 

before

 energizing.

HIGH VOLTAGE

MAINTENANCE

CAUTION: Always isolate mains power before starting maintenance operations.

 

Ensure that all mounting (and device) screws/bolts are fully tight and free of corrosion.

 

Ensure there is no deformation to the housing, lenses or fixing points.

 

Check that all power supply cables are free from physical damage or material fatigue.

 

Use only genuine spare parts supplied by Acclaim Lighting.

CLEANING

 

Use a moist, lint-free cloth along with warm water when cleaning each fixture.

 

Never use alcohol or solvents.

SAFETY, MAINTENANCE AND CLEANING

Содержание Terra Linear





































Отзывы: