Acclaim Lighting Terra Linear, Руководство пользователя

Страница: 26 / 36

24
www.acclaimlighting.com
SETTING THE CELL MODE (PERSONALITY)
The 4’ (1220mm) models offer a choice of modes that determine whether all of the emitters
act as a single 4’ cell, two 2’ cells or as four separate 1’ cells, each with their own set of DMX
addresses - see page 23. Additionally, two modes are provided to allow each fixture to
operate independently of external control:
•
INSIDE CHASE runs a slow color/dimming chase across the fixture,
•
MANUAL takes all emitters to 100%.
TO SET THE CELL MODE USING THE XMT-350
1 Connect the XMT-350 to the DMX input line of the Terra Linear installation.
2 On the XMT-350, press the
MODE button, then use the arrow buttons to highlight the
RDM function and press the button to select. The XMT-350 will search for RDM devices
and after a short while the XMT-350 will display a list of all located fixtures. The fixture
highlighted in the list will flash its emitters to identify itself.
3 If necessary, use the up/down buttons to highlight an alternative fixture.
4 Press the button to view details for the chosen fixture and then use the down button
to highlight the
DMX PERSONALITY
entry:
5 Press the button to view the options:
6 Highlight the required cell mode:
•
For white models, choose either 1 GROUP W , 2 GROUP W or 4 GROUP W ,
•
For dynamic white models, choose either
1 GROUP CCT
,
2 GROUP CCT
or
4 GROUP CCT
,
•
For RGBW models, choose either 1 GROUP RGBW , 2 GROUP RGBW or 4 GROUP RGBW ,
•
For standalone chase mode, choose
INSIDE CHASE
,
•
For 100% static output, choose MANUAL .
7 Press the button to fix the highlighted choice.
8 Press the button to return to the previous screen.