11
www.acclaimlighting.com
POWER AND CONTROL WIRING
The combined power and control cord (roughly five feet, 1.5m in length) enters the casing
via a water-tight gland on the underside of the fixture. The cord is supplied with a bare tail.
POWER
The power requirements are as follows:
•
Voltage: 100-240VAC 50/60Hz
•
Power:
13W steady state
The power cord color designations are as follows:
IN-RUSH CURRENT
Although LED fixtures are low power devices compared to their incandescent equivalents,
their power supplies exhibit a trait known as ‘in-rush current’ when they are first powered
on. This is caused by the various components within the switching power supplies topping
themselves up with power. The in-rush current period lasts only milliseconds and does not
cause any effect when a handful of units are powered on at the exact same time. However,
if many fixtures are linked to the same power input, they will momentarily pull a current that
may greatly exceed their normal operating level. This may affect over-current trips when
power is applied. For this reason it is advisable to limit the number of fixtures on any one
power input.
Bro
wn
[Li
ve]
Green/Y
ellow [Ear
th]
Gloss Black [Neutral]
Ma
tt B
lac
k [D
MX
Gr
ound]
Gra
y [I
N D
MX
–]
Red [IN DMX +]
Green [
OUT DM
X –
]
Wh
ite
[OUT DMX +]
Содержание Dyna Accent Mini
Страница 1: ...Dyna Accent Mini User guide...
Страница 2: ......
Страница 26: ...www acclaimlighting com...