9
www.acclaimlighting.com
FITTING A SPREAD LENS
The standard beam angle options are 7 or 12 degrees. These can be adjusted by inserting an
appropriate spread lens (20
O
, 40
O
, 60
O
or 10
O
x 60
O
) into the inside of the front panel.
TO FIT A SPREAD LENS
Notes: This operation is best achieved with the Dyna Accent Mini front face lying horizontally.
Install spread lenses only in dry conditions to avoid any build up of condensation.
1 Using a Phillips screwdriver, remove the four screws which secure the front hood to the
main body of the fixture.
2 Remove the protective films from both sides of the spread lens. Ensure that the black
rubber gasket is correctly in place around the circumference of the spread lens.
3 Place the spread lens into the recess in front face of the fixture and ensure the
Notch
on
one side of the lens’ rubber gasket faces away from the emitter and also aligns with the
fixture’s
Drainage recess
.
Note: When correctly placed, the matt side of the lens will face the
emitter.
4 Place the front hood over the spread lens and the fixture’s front face, ensuring that the
Drain
hole
of the front hood aligns with the
Notch
in the lens gasket and the
Drainage Recess
of
the fixture.
5 Reintroduce the four screws and tighten sufficiently.
Front hood
Drain hole
Notch
Drainage recess
Note: 10
O
x 60
O
spread
lenses produce an
elongated beam shape
which you may need to
rotate within the rubber
gasket to achieve the
required focus.
Содержание Dyna Accent Mini
Страница 1: ...Dyna Accent Mini User guide...
Страница 2: ......
Страница 26: ...www acclaimlighting com...
