Time-code
Normally the memory is played back using the internal timings of the Art SSC. When the 'Time-code'
check box is enabled, the internal timing is ignored and the playback is synchronised to the time-code.
Please select a time-code source in the settings page.
Loop
The 'Loop' check box controls whether the playback stops when it reaches the end of the track, or
whether is should continue looping inde;nitely. The Loop feature is only available when 'Time-code' is
disabled.
Routing
The DMX values outputted by the Recorder can be routed to either or both DMX-512 outlets and Art-
Net. This can be controlled in the settings page (see page 31).
21
