Set Date & Time
You can quickly copy your computer's date and time to the Art SSC by selecting a device and clicking the
'Set Date & Time' button.
Upgrade Firmware
To upgrade the ;rmware, ;rst select your device and press the 'Upgrade Firmware' button. The
dialogue allows you to select from the ;rmware available.
Caution: Make sure the power to the device is uninterrupted during the upgrade process.
Factory Defaults
The memory containing all user data like cues, recordings and actions is completely erased and all
settings are reverted to their defaults by pressing the 'Factory Defaults' button. This action does not
aFect the device's IP settings.
RTC Calibration
In case the time in your Art SSC's Real-Time Clock (RTC) drifts then you are advised to perform a
calibration. Start the calibration process by pressing the 'Start RTC Calibration' button. Then wait a
while for the measurement to take place. The longer you wait the more accurate the calculation will be,
we recommend somewhere between 30 to 60 minutes. Then press the 'Stop RTC Calibration' button a
dialogue will inform you of the results. Press OK to apply the calibration value.
Backup
You can make a backup of all the programming data inside the device. This backup ;le (an XML) is saved
on your computer's hard-disk and can be easily transferred via e-mail or USB stick. You can restore the
backup via the 'Restore' button.
The backup ;les can be found at following location:
Windows XP
C:\Documents and Settings\[username]\My Documents\Acclaim\Cuety\Backups
Windows Vista
C:\Users\[username]\Documents\Acclaim\Cuety\Backups
Windows 7
C:\Users\[username]\Documents\Acclaim\Cuety\Backups
Mac OS X
/Users/[username]/Acclaim/Cuety/Backups
Ubuntu Linux
/home/[username]/Acclaim/Cuety/Backups
8
