Figure 4
Figure 5
Operation manual
In the event of a power failure use the key to unlock the lock and push the release bar down about 90 degrees to open and
close the door manually, use the release key as follows:
1) Insert the supplied key into the lock.
2) Turn the key and push the release bar down about 90 degrees to release the gear. (Note: Do not exceed 90 degrees, do
not use too much force, otherwise the release bar may be damaged.)
3) Open and close the door manually.
Note: If the door hits the mounting post and cannot be opened electrically, move the door a couple of inches by hand, so
you can unlock the door with the key, open and close the door manually.
Cable connection
Make sure the equipment is turned off before making any electrical connections.
Gate
Gate
Spring
Spring limit
limit switch
switch
Spring
Spring limit
limit switch
switch stop
stop block
block
Gear
Gear rack
rack
Output
Output gear
gear
M6×18
M6×18
M6×18
M6×18
Opening your life
Code:
PB400
www.accessmatic.com
Opening your life
1
