AccessECU 2005 Скачать руководство пользователя страница 54

Страница: 54 / 70

“““““AccessPORT communication failed (code 0x5b4). Is port in sync mode?” error

AccessPORT communication failed (code 0x5b4). Is port in sync mode?” error

message when attempting to connect to AccessPORT?

message when attempting to connect to AccessPORT?
This message will occur when another program is accessing the COM port we
are attempting to use. Only one device can access a COM port at a time. If you
have another serial device, such as a Palm Pilot, that you normally connect to
this PC you will need to disconnect and stop the software before continuing.

TTTTTransmit Errors

ransmit Errors

“Unable to write valid data to AccessPORT” error message when trying to

“Unable to write valid data to AccessPORT” error message when trying to
transmit map file to AccessPORT?

transmit map file to AccessPORT?

transmit map file to AccessPORT?
When transmitting a map to the AccessPORT, the data is first written and then
read back to verify what was written matches the map file you are attempting to
transmit to the AccessPORT. If this data does NOT match, an error will occur.
This can be due to corrupt or unstable communication between the PC and the
AccessPORT, a memory fault within the AccessPORT, or some other hardware
failure. Contact technical support to arrange having your AccessPORT sent in for
inspection and if necessary, repair. Do not use the AccessPORT to flash your ECU
until the reasons for this error message have been resolved.

“Map file is invalid (wrong version of map/AccessPORT)” error when attempting

“Map file is invalid (wrong version of map/AccessPORT)” error when attempting
to send/transmit map file to AccessPORT?

to send/transmit map file to AccessPORT?

to send/transmit map file to AccessPORT?
This error will occur when the map version you are attempting to load on the
AccessPORT does not match the AccessPORT version. For example, if you are
attempting to load a 2002-2003 WRX map file onto a 2005 WRX AccessPORT, it
will fail and give you this error message. To verify this, check the status line of
the Map Manager software to see what AccessPORT version you are currently
connected to. Next, right-click on the Map file you wish to send to the Access-
PORT and select Properties. Look at the Model: line to see what the map is
designed for. If these do not match, you cannot load the map to the Access-
PORT. If you downloaded these maps off the Internet, verify you are in fact
downloading the correct files.

“No base/realtime map slots available. Remove a base/realtime map and retry”

“No base/realtime map slots available. Remove a base/realtime map and retry”
error when attempting to send/transmit map file to AccessPORT?

error when attempting to send/transmit map file to AccessPORT?

error when attempting to send/transmit map file to AccessPORT?
Occurs when there are no more empty memory slots on the AccessPORT for the
map file type you are attempting to send to the AccessPORT. The AccessPORT
has 6 Base Map and 10 Realtime map slots. If you receive this message, first
remove a map from the AccessPORT before attempting to send the new map.