Accent 1400 User’s Guide
27
NuVoice Software Basics
Putting the Device to Sleep/Waking the Device
When you finish using the device for the day, put it in sleep mode overnight. This allows Windows®
updates to download. To put the device to sleep, do either of the following:
Quickly press and release the power button
or
Select the
Sleep
key in the NuVoice Toolbox
When the device is inactive for a prolonged period, it will go into sleep mode automatically. The green
power LED will remain illuminated while the device is in sleep mode. To wake the device, do either of
the following:
Select the Tools button on the front of the device
or
Quickly press and release the power button
Note:
The device may wake up if an eye tracking module is attached or if Windows updates are set to
install automatically. To preserve the charge overnight, either connect the charger or power off the
device. Transporting the device in a carry case may also wake it. In that case, power off the device.
Restarting the Device
Recommendation:
Restart your device once per week if you don’t normally turn if off at night or every
few days. When the device won’t be used for more than a couple days or when it will be transported in
a carry case, power it off instead (see “Powering Off the Device” below). To restart the device:
3.
Select the
Tools
key and then select the
Toolbox
key.
4.
Select
Maint Menu
and then select
Power Management
.
5.
Select
Restart
and then select
Yes
at the confirmation prompt.
Powering Off the Device
Recommendation:
Power off the device when it won’t be used for more than a couple days or when it
will be transported in a carry case.
3.
Select the
Tools
key.
4.
Select the
Shutdown
option.
5.
Select
Yes
at the confirmation prompt.
