Storing Your Device
If you are not going to use your device for a month or more:
1.
Charge the batteries to full.
2.
When the batteries are fully charged, go to the Toolbox and select
Maintenance Menu
.
3.
Open the
Battery Menu
.
4.
Select
Enter Ship Mode
.
5.
Respond
Yes
to put your device into Ship Mode.
6.
Select
OK
to exit the Battery menu.
7.
Select
OK
to exit the Maintenance menu.
8.
Unplug
the battery charger.
9.
Store your device in a dry place that does not get too hot or too cold.
When you are ready to use your device again:
10.
Plug in the battery charger.
11.
Press the power button on your device. Your device will start up. Leave the charger plugged
in until the batteries are fully charged.
You can always check the status of the charge by looking at the bar graph next to the battery
icon in the status display area. If the batteries have gone completely dead, you will not be able
to use your device. Plug in your charger. The charging LED on the front of the device will be red.
When the batteries are full, the LED will be blue.
Disposing of the Device or Battery
Device Disposal
Please dispose of your device in accordance with local, state and/or federal electronic recycling
laws.
Battery Disposal
If the batteries in your device need to be replaced, dispose of the old batteries in accordance
with your local, state and/or country regulations.
Accent 800 Hardware Manual
Page 28
