Modifying a Device
1.
Use the Up/Down arrows to select the appropriate device. When the appropriate device is
found, tap the button for the desired function and follow the instructions on the display.
2.
Select
Modify Selected Device
.
3.
Select the function to be changed and follow the instructions on the display.
4.
When instructed, point the appliance’s remote control at the top of the Accent and press
the appropriate function button on the remote (e.g., power).
When teaching the device a new signal or re-learning a signal, make sure the remote is
pointed directly at the IR Learning Receiver on the left side of the headphone jack.
5.
The Accent will beep when it receives the signal.
6.
Select
Test Signal
to confirm that the signal functions properly.
The Re-Learn All Signals option allows each signal for an appliance to be re-learned
without re-entering the menu each time.
Sending IR Signals to an Appliance
1.
Make sure the IR area on the Accent is facing toward the appliance that will receive the
signal.
2.
Select the device remote from the vocabulary screen.
3.
Select the desired function.
Accent 800 Hardware Manual
Page 20