Accel AV304, Руководство пользователя

Страница: 13 / 74

7
2.3 Rear Panel
The following is the rear panel of the AV300series system.
[AV304/AV308]
[AV316]
No. Name Description
1
VIDEO-IN (BNC) Connect camera. (Supports NTSC/PAL)
2 LOOP-OUT
Camera images of each channel will be outputted as is. Also, used when
the corresponding image is required for other product (8 channel has no
LOOP-OUT).
3
MON-OUT
Connect to the main monitor for camera image for
surveillance/management/playback.
4 SPOT-OUT Use to output the entire surveillance screen one by one, in an interval.
5
S-VIDEO Connect to S-Video input terminal to output image of the main monitor.
6
Select NTSC / PAL Select the signal system. (NTSC / PAL)
7
AUDIO IN Connect Audio Input Device. (With Amp.)
8 AUDIO OUT Connect Audio Output Device. (With Amp.)
9
ALARM/ SENSOR
/RS-485 Terminal to connect external input sensor of 1~4 channel. (Supports N/O
or N/C) Connect RS-485 signal output or relay for P/T/Z camera control.
10 VGA Port Connect to PC Monitor.
11 LAN Port 10/100 Ethernet connection terminals for remote connection.
12 Power Input Power cable connection terminal for connecting to main power.
13 Power Switch
Switch to change input power. (115/230V)
Note Check whether the specification of the peripheral devices connecting to the AV300series matches with the
specification supported by AV300 series system. Enquire from your vendor for detail explanations. For Audio
input/output, use the product with amp attached.