Switch OFF power to the spa.
Disconnect spaside control panel / keypad.
Open WIFI box and reconnect keypad to the WIFI board.
Connect WIFI board to the spa controller then turn power back ON.
Select “Settings” on your smart phone. Choose Wireless Networks / WIFI.
Scan Available networks.
Select AGI_BOARD XXX.
Your phone should connect to the Board.
GO to your phone Browser and enter //192.168.1.3.
Touch “Display Scan Results”.
Select your home network (Router).
Enter the router PASSWORD or (WEP Key) if password is not recognized.
Enter your e-mail.
Re-enter your e-mail.
Touch “ACCEPT”.
Touch “Join”.
Page should exit or Time out.
Check your e-mail on your phone. Depending on the phone service this may take
1-2 minutes. You can also check for the same email on your home computer.
Enter a USER name (6 characters, NO spaces).
Click “Register”.
Bookmark this page and add it to your phone home page.
**You can forward the link or the registration email up to nine more spa users.
Use different spa name every time.
W I F I C O N N E C T I V I T Y P R O C E D U R E
Page 21
Page 6
SPA-SIDE CONTROL PANEL 2020
FUNCTIONS
If primary pump is dual Speed. Press once to
activate the low jets. Press again for high jets.
A third depression turns the jets OFF, if the
heater is off.
Press, for third or fourth pump. If auxillary pump
is dual speed the AUX button functions
as above.
Press, for air bubbles or second pump
single speed.
Light switch ON/OFF
*Optional
• TEMPERATURE
• TIME OF DAY
TO INVERT THE TEMPERATURE DISPLAY:
PRESS THE SET & UP ARROW KEYS TOGETHER AT THE SAME TIME
.
