WIRING DIAGRAM FOR SC-1100 (JR.)
WIRING DIAGRAM FOR SC-3000
I N A H U R RY - R E A D T H I S
SmarTouch Digital comes to you with a universal set of default
settings. If you choose to keep these settings, then you only
need to remember 2 things: how to set the spa temperature and
to press the SET key whenever you are done using the spa.
Setting Temperature
The
UP
(TEMP) &
DOWN
(TIME) arrows.
Press and hold for 2 sec. the UP (TEMP) arrow key.
Controller will display current spa temperature.
Use the UP or DOWN arrow keys to select
desired temperature.
*To enter new temperature press
→
SET key.
The controller will:
- Lock-in the new temperature.
- Display current spa temperature.
IMPORTANT: Always turn down the heat before you drain the spa.
*Note:
Once you select the TEMP or TIME and the SET key is not pressed within
30 seconds the controller reverts to the previous setting and the change
will not take effect.
The SET Key
After using the spa, press the SET key to tell the micro controller you are
done using the spa. It will then take over the spa’s management, including
the different filtration cycles, heat maintenance, economy modes and
protection against freezing.
Both buttons are used to select, increase
or decrease temperature or time setting.
Note: Both keys are active when pressed
individually and held down 2 seconds, to
eliminate accidental changes.
Page 23
Page 4
