7
AEC-6293 Manual
PCI Slot
4. Screw the AEC-6293 onto the chassis.
5. Connect AEC-6293 with a SATA /IDE hard drive via SATA /eSATA /IDE cable and connect the
power cord to the hard drive properly.
Notice:
The Serial ATA cable is used to transfer data in very high frequency. It is suggested no to
connect and disconnect offten, or the connector could be damaged.
6. Close the chassis and power on the system.
7. If your have external eSATA system, connect AEC-6293 with external SATA system via eSATA
cable.
SATA HDD
SATA Cable
SATA Power Cord
IDE HDD
IDE Cable
Please follow the 7 steps to install AEC-6293
1. Be sure that the system power has been off.
2. Open the chassis of PC.
3. Insert AEC-6293 into an available PCI slot.
Chapter 2 Hardware Installation
