12
AEC-6293 Manual
9. In “System Properties” click “Hardware”.
11. Under “SCSI and RAID Controllers”, double click “AEC-6293 2-CH SATA RAID & 1-CH IDE
Adapter” to see if the card is installed successfully.
NOTICE
: During driver installation, if you encounter the problem of Windows logo, please click
“Continue Anyway”. Windows logo is a mechanism designed to prevent OS from working
abnormally because of installing unidentified software. Yet, the driver of AEC-6293 is proven not to
affect the entire work of OS.
10. Then click “Device Manager”.
4.1.2 Boot from AEC-6293
Please follow the steps below to install a new OS to the hard drives connected to AEC-6293. Thus
you can boot from AEC-6293.
1. Find the support CD containing the driver of AEC-6293 from the package. Copy the driver into a
formatted floppy disk, and label it. Please refer to Appendix A.
2. If you want to boot from the RAID subsystem, please enter the BIOS of AEC-6293 to build a
RAID where you intend to install an OS.
3. Place the OS installation CD into CD-ROM, and boot from hence.
4. On seeing the first blue screen, you need to press <F6> to install the OS to the hard drives
connected to SCSI or RAID card. After the installation program loads required files, please
press <S> and put the driver disk into floppy drive.
5. The installation program will load the driver of AEC-6293. And you can select the hard drives or
array where you intend to install the OS. Then follow the wizard to complete.
6. During installation, if you encounter the problem of Windows logo, please click “Continue
Anyway”.
