Manual de usuario
Abyx Fit Milano
abyx
CÓMO ENCENDER/APAGAR
Mantén presionada la pantalla hasta que se encienda el reloj. Para apa-
garlo, desplázate hacia abajo por el menú y selecciona "Configuración",
luego "Apagar". El reloj también se enciende automáticamente cuando se
está cargando.
CÓMO MOVERSE ENTRE PANTALLAS
Desliza hacia la izquierda, derecha, arriba o abajo para desplazarte por
las opciones del menú del reloj. Toca los íconos para ingresar a un sub
-
menú o activar una función. Consulta el diseño del menú en las páginas 7
y 8.
DESCRIPCIÓN DEL PRODUCTO
ES
ABYX-FIT-MIL
Made in the PRC
Pins de carga
Sensor de
Frecuencia Cardíaca
Pantalla táctil
completa
CÓMO CAMBIAR LA BANDA
www.abyx-fit.com
ESPECIFICACIONES TÉCNICAS
Batería: Li-ion 150mAh
Pantalla: IPS 240*240 pantalla táctil a color
Tectnología bluetooth: 4.0 BLE
Tiempo en espera: hasta 10 días
Potencia máxima de radiofrecuencia: 0.35dBm
Radiofrecuencia: 2402-2480MHz
Resistencia al agua: IP68
Dimensiones: 48 x 34 x 11 mm.
Peso: 67 g
CARGANDO TU ABYX FIT MILANO
Utiliza solo el cargador suministrado con tu Abyx Fit Milano para cargar tu
reloj. Puedes conectar tu cargador a cualquier puerto USB con
alimentación. Se recomienda cargar el reloj al menos 30 minutos antes de
conectarlo a tu teléfono inteligente. Cuando el reloj se esté cargando, la
pantalla muestra un icono de batería verde que indica el estado de carga.
No dejes tu reloj cargándose desatendido.