1
Operation Guide 5547/5563/5572
MA1705-EA
© 2017 CASIO COMPUTER CO., LTD.
Stopwatch functions
•
Be sure to keep all user documentation handy for future reference.
•
Your watch may differ somewhat from the one shown in the illustration.
30
Click 2
Click 1
Day Indicator
24 Hour Hand
Second Hand
Hour Hand
Minute Hand
Stopwatch Second Hand
Stopwatch Minute Hand
Crown
To change the day indicator setting
To adjust the time setting
Pull the
Crown
out to Click 1.
Push the
Crown
back in.
Rotate the
Crown
to change the
time setting.
When the second hand is at
12 o’clock, pull the
Crown
out to
Click 2.
Rotate the
Crown
towards you to
set the day.
Note
•
The day indicator setting uses a
31-day month. Make adjustments for
months of shorter lengths.
•
Avoid changing the day indicator
setting between the hours of 9
p.m. and 1 a.m. Otherwise, the day
indicator may not change correctly
at midnight.
Crown Operations
Some water-resistant models (100 meters, 200 meters) have a
screw-in crown. When you need to perform a crown operation,
rotate it towards you to unscrew it. Then pull the crown out.
Avoid applying undue force when pulling. The watch loses
its water resistance while the crown is unscrewed. After
performing a crown operation, fully screw the crown back in.
Crown
Loosen
If your watch has a rotary bezel...
You can rotate the bezel to align its
▼
mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the
▼
mark.
Start
Elapsed time
Current
Low Battery Alert
•
The second hand will jump at two-second intervals to alert you when the charge is low.
•
Have the battery replaced as soon as possible after low battery alert is indicated.
•
Stopwatch operation is disabled during low battery alert.
•
If low battery alert occurs during a stopwatch operation, the stopwatch will
automatically reset to all zeros and stop.
Push the
Crown
back in on a time
signal to resume timekeeping.
Note
•
Take care that you set the correct AM
or PM time.
•
When changing the time, move the
minute hand four or five minutes past
your final setting, and then back it up
to the setting you want.
Specifications
Accuracy at normal temperature:
±20 seconds a month
Stopwatch:
Measuring Capacity: 9'59" (10 minutes)
Measuring Unit: 1 second
Measurements: Elapsed time; split time; two finishes
Other:
Low battery alert
Battery:
One silver oxide battery (Type: SR920SW)
Battery Life:
Approximately 3 years
Specifications are subject to change without notice.
Perform the following procedure if the stopwatch hands do not return to their 0 (zero)
positions when you reset the stopwatch.
Correcting the 0 Positions of the Hands
Pull the
Crown
out to Click 2.
Use
A
(clockwise) and
B
(counterclockwise) to move the
Stopwatch Second Hand
to 12 o’clock and the
Stopwatch Minute Hand
to 0.
•
Holding down either button will move the second hand at high speed, until you
release the button.
•
The
Stopwatch Minute Hand
is syncronized with the
Stopwatch Second Hand
.
After all of the hands are the way you want, push the
Crown
back in.
Important!
•
Timekeeping stops while the crown is pulled out. Correct the current time setting
after performing the above operation.
Using the Stopwatch
Important!
•
Do not operate the stopwatch with the crown pulled out.
Note
•
An elapsed time operation will stop automatically at the end of 10 minutes.
The stopwatch measures elapsed time in 1-second increments up to 9 minutes,
59 seconds.
Elapsed time
A
A
A
A
B
Start
Stop
Resume
Stop
Reset
Split time
A
B
B
A
B
Start
Split
Split release
Stop
Reset
Two finishes
A
B
A
B
B
Start
Split
First runner
finishes.
Display time of
first runner.
Stop
Second runner
finishes.
Split release
Display time of
second runner.
Reset
