16
English
4.3. TVIP41560
Mounting the camera
Loosen the fixing screws for the camera dome and remove them. Use
the accompanying drilling template for drilling the mounting holes.
Secure the base plate with the screws and dowels provided.
Use the fixing screws to screw the camera dome back on to the camera. Adjust the orientation of the
camera before doing this.
Orientation of the camera
First, undo the black dome cover. Loosen the screws at the side of the bracket to align the lens.
The camera can be aligned in three axes.
Panning: 0°
–355°
Inclination: 0°
–65°
Rotation: 0°
–360°
Important:
Do not forget to tighten up the screws again!
4.4. TVIP61560
Mounting the camera
Use the accompanying drilling template for drilling the mounting holes.
Secure the base plate with the screws and dowels provided.
Orientation of the camera
The camera can be aligned in three axes.
Panning: 0°
–360°
Loosen the rotary wheel (1) to adjust the alignment horizontally.
Inclination: 0°
–90°
Loosen the screw (2) to adjust the alignment vertically.
Rotation: 0°
–360°
Loosen the screw (3) to adjust the rotation of the camera image.
Important:
Do not forget to tighten up the screws again!
1
2
3
