49
IMPORTANT
When no telephone number is programmed, the display shows
“BLANK”. Press the
key to delete the programmed telephone
number.
Enter the desired telephone number.
123456
IMPORTANT
Press
for a dial pause of three seconds. This is shown in the
display as a comma. The entry cursor can be moved to the left by
pressing
or to the right by pressing
.
Press the
key to save the entries.
Repeat this procedure for numbers 2, 3 and 4.
Press
to end data entry.
10.1.2 Dialling mode
This function is used to switch the dialling mode from DTMF (tone
dialling) to pulse dialling. You can also select automatic recognition of
the correct dialling mode (AUTOMATIC setting).
1. Enter your programming code (default: 1234). The following
message is shown in the display:
READY
Press
. The display shows the following:
ENT 1-4
Press
-
to enter telephone numbers 1-4. The display now
changes between the selected telephone number and the programmed
number.
TEL NO 1
