47
If you have already made settings on the device, then the following
message is shown on the standby display:
SD1
Enter your user code (default: 1234). The following message is shown
in the display:
READY
The programming menu is now active.
IMPORTANT
If no entries are made in the programming menu for 60 seconds, then
the device leaves the programming mode automatically.
9.2.2 Ending the programming menu
1. Press the
key repeatedly until the display shows the
following.
READY
Press
to leave the programming menu and return to the standby
menu.
10. Menu
functions
The menu functions are used for configuring the Terxon PSTN dialer
and offer a wide range of test possibilities.
Menu function
Description
Telephone numbers
Entry of telephone numbers 1-4
Messages
Recording voice messages
Delete
Deleting messages and contacts
Programming code
Changing the programming code
Code length
Length of the programming code
