Using the system
21
4.12 Testing the system
A master or admin user can use the Test option to test various components of the system, and to check the
current owner of a remote control or HUA transmitter.
4.12.1 Testing sirens and sounders
To carry out the test:
1.
Select Test – Sirens & Sounders.
2.
Press
s
or
t
followed by
✓
to select the devices to test:
Ext. Radio Sirens
External radio sirens and their strobes.
Wired Sirens
Wired sirens and their strobes.
Loudspeakers
Extension loudspeakers, keypads and other internal sounders.
Wired Keypads
Sounders in wired keypads.
3.
Press
s
or
t
to select whether to operate all sirens\ sounders of the selected type that are assigned
to a specific partition. Press
▶
to switch the sirens\ sounders on, and
▶
again to switch them off.
4.
Press
✘
to finish the test.
4.12.2 Testing a wired keypad
Note:
You can test only the keypad you are currently using (you cannot test a keypad remotely).
To carry out the test:
1.
Select Test – Wired Keypad.
The bottom line of the display shows the keypad name and bus address. For example:
Press keys to test:
KP 51 :Kexypad K1-51
All four ABCD LEDs and LEDs around the navigation keys should glow red.
2.
Press
s
,
t
,
▶
and
◀
in turn to test the navigation keys. Each time you press a key, the LEDs should
change colour and the display show the key you pressed.
3.
Press both HUA keys at the same time. The display should confirm that you pressed the HUA keys. An
HUA alarm is not generated.
