Abtus MAX-HDBT44/P, Руководство пользователя

Страница: 9 / 28

*Specifications are subject to changes without notice.
9
SYSTEM CONNECTION
Connect an IR receiver with IR carrier to the IR IN port of the Matrix Switcher; users
can control far-end output displayer via its IR remote from local.
In that case, the IR signal is transferred via twisted pair. Only the corresponding IR
OUT port can emit control signals to the remote display.
See the figure below:
Control far-end device from Local
Note: The IR receiver connected to IR IN must be with IR carrier
Control Far-end Device locally
Connect IR receiver(s) to IR IN on far-end HDBT receiver(s), and IR Emitter(s) to IR
OUT port of the switcher, and use the IR Remote of local source to control the device
remotely.
● 1 to 1:
Connect an IR receiver to IR IN on far-end HDBT receiver, and an IR Emitter to IR
OUT port of the switcher. Use the IR Remote of local source to control the device
remotely. See below:
Control Local Device Remotely
ABtUS
MAX-HDBT44/P
(back view)
Receiver
HDBT-HD11RP
HDMI Out
IR Out
HDBT
Out