Abtus MAX-HDBT44/P, Руководство пользователя

Страница: 11 / 28

*Specifications are subject to changes without notice.
11
SYSTEM CONNECTION
RS232 COMMUNICATION COMMANDS
The IR signal is sent by IR remote, then it is transferred to HDBaseT receiver, then to
corresponding zone of the matrix through the twisted pair, finally it is transferred to IR
OUT port and received by controlled device.
IR Matrix
Sending command (reference to RS232 Control): [x1]R[x2].
x1: Corresponding to the 4 IR OUT ports of the Matrix Switcher, the IR transmitter
connected to this port can be placed at IR receiving area of output device or the
Matrix Switcher itself.
x2: Corresponding to the zone (receive IR signal from HDBaseT receiver with IR IN
port connects with IR receiver) number of the Matrix Switcher.
→ Example: Send command “3R2.” to transfer IR signal received from zone 2 to IR
OUT port 3.
Except the front control panel, the Matrix Switcher can be controlled by far-end
control system through the RS232 communication port. This RS232
communication port is a 3-pin phoenix connector. User can use the RS232
cable (Phoenix to 9-pin D-Sub) to connect the RS232 port to PC, see as below:
Switching Operation
RS232 Connection
ABtUS
MAX-HDBT44/P
(back view)
RS-232