Abtus MAX-HDBT44/P, Руководство пользователя

Страница: 3 / 28

*Specifications are subject to changes without notice.
3
No. Name Description
1 FIRMWARE Micro USB port for updating firmware
2 Power Indicator OFF: No power;
RED: DC power present or Standby Mode.
6 INPUT selector Indicators Total 4 groups, and each group is set up including 4
green indicators for 4 input sources, numbered from
“1” to “4”.
4 Output selector button Total 4 output selector buttons, press the buttons to
switch input cycle for the output.
No. Name Description
1 HDMI INPUTS 4 x HDMI input ports, type A female HDMI connector, connect
the Source with an HDMI cable to any of the HDMI inputs.
2 IR IN ● 3 x IR IN: Connect with IR receiver, fixed IR input
for the output, cannot be switched separately. It
makes up an IR bi-directional transmission with the
IR OUT on the corresponding HDBaseT receiver.
● 1 x IR EYE: Connect with extended IR receiver, use
the IR remote to control the Matrix Switcher.
3 IR OUT(1~4) Plug in the IR Emitter and attach to the front of the Source.
This then emits the IR signal received from the HDBaseT
Receiver. There are 4 IR OUTPUT sockets marked on IR matrix.
4 OUTPUTS ● HDBaseT : The HDBT RJ45 outputs deliver HD video,
Audio and PoC to the HDBaseT Receiver up to 70m.
● HDMI : Connect an HDMI cable from the Matrix
Switcher to the displayer.
●
SPDIF
: Digital audio output connects directly via an
optic fibre cable to the Toslink input on a sound bar.
● RCA (L&R) : PCM Analogue audio output sockets
connect the de-embedded audio additional speakers
5 Control ● TCP/IP: RJ45 port. Connect with PC for Web-based
GUI control.
● RS232: Serial port for unit control, 3-pin pluggable
terminal block, connects with control device (e.g. PC).
6. DC 24V Connect with DC24V 2.71A power adaptor
PANEL DESCRIPTIONS
Note: Pictures shown in this manual are for reference only, different model and specifications are subject to real product.
Front Panel
Rear Panel
1 3 2 4
1 2 4 5 6
3