9
2.3 Receiver Overview
2.3.1 Receiver Antenna
Attention
•
For best signal quality, ensure that the receiver is mounted away from motors
or metal parts.
2.3.2 Status Indicator
The status indicator is used to indicate the power and working status of the receiver.
•
Off: the power is not connected.
•
Lit in red: the receiver is on and working.
•
Flashing quickly: the receiver is binding.
•
Flashing slowly: the bound transmitter is off or signal is lost.
2.3.3 Connectors
The connectors are used to connect the parts of model and the receiver.
•
CH1 to CH4: used to connect the servos, power or other parts.
•
BIND/VCC: used to connect the bind cable for binding, and the power cable during normal operation.
•
SERVO: used to connect i-Bus module and extend channels.
•
SENS: used to connect all kinds of sensors.
2.3.4 USB Simulator Mode
The system may be used as a HID controller when connected to a computer via USB. When connected
to a computer the function is activated automatically and will be recognized by windows as a game
controller.
To calibrate or test the system in windows:
•
1. Type "RUN" into the search bar and select the program.
•
2. Type "joy.exe" into the "Open:" box and press enter.
•
3. Select the system and open properties within the game controller menu.
•
Note: any changes made to trims within the system will take effect in the USB mode. If the system
is not responding as expected, reset to factory settings in the system menu.
CH 1-4
Bind/VCC
Software Update Button
Servo Input Port
Antenna
