16
Digital proportional radio control system
6.3 Subtrim Function
Subtrim changes the center point of the channel. For example, if a car's wheels are slightly out of
alignment, the sub trim could be used to fix this.
To set the subtrim function:
1. Select the desired channel from the list. The setup menu for the selected channel displays.
•
At the top of the current channel, the selected channel and percentage are shown.
•
The center point location is shown as a bar and needle.
•
The red needle indicates the current setting for the selected channel.
•
A real time readout of the channels position can be seen in this menu as a green bar.
2. Move the wheel at the bottom of the screen left to reduce the value or right to increase the value.
3. Select the
icon to return to the previous menu and save.
•
To restore default settings of a single channel, select the
icon within its subtrim menu.
•
To restore the entire function to default, select the
icon in the channel selection menu.
Channel List
Subtrim setting and channel's current position
