Absco Industries
Assembly Instruction Manual
ABSCO COMPACT GARAGE
MODEL: CG56552N2
5.64m W x 5.49m D x 2.64m H
Model: CG56552N2
16/10/19
18
Frame Construction
1. Rear Frame
To secure each frame to the slab, move the frame to its marked position. Whilst one
other person holds the frame in position. Mark the hole position of each upright, move
the frame away enough to drill the slab for each anchor, move the frame back and secure
in position.
Rear frame can be supported with
ropes and pegs, or roof purlins
used as braces during this stage.
2. Center Frame Connection
Bend the inside tab at
right angles to secure to
the rear wall girt.
Side
wall
girt
Secure the first center frame to slab. Fit eight side wall girts K1780 at the same height as the rear wall
girts. Secure every connection with two tek screws.
K1780