background image

Assembly Instructions 

ITEM# L-GZ136PST-9 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING   

In order to reduce the risk of personal injury and damage to equipment, basic safety precaution should always 

be followed when assembling and using this product. Read all instructions carefully before assembly and use.   

 

 

Some parts may contain sharp edges. Wear protective gloves if necessary.   

 

In order to ensure safe assembly, it is recommended that this product be assembled by at least two 

people. 

 

Keep children and pets away from the assembly area. 

 

Begin the assembly at least 6’ (1.8 m) away from any obstruction, such as a fence, garage, house, 

overhanging branches, laundry line, or electrical wires. 

 

Install this gazebo on level ground. This gazebo cannot be permanently stacked or attached to a 

concrete floor or platform. This gazebo is intended for decorative and sunshade purposes only, and is 

not designed to withstand harsh weather, including high winds, rain, and snow. 

 

Verify that all nuts and bolts are tightly secured before and during use. 

 

Remove the canopy or take other precautions in high wind conditions. 

 

Anchor or stake a minimum of four (4) locations of the unit to the ground for added safety and security. 

Summary of Contents for L-GZ136PST-9








Reviews: