![background image](http://html1.mh-extra.com/html/abs/abt-frp-04/abt-frp-04_owners-manual_3502201022.webp)
P a g e
| 22
Factory Warranty Policy
Horizon Scientific, Inc. warrants to the original purchaser every new Horizon Scientific,
Inc. refrigerated unit, the cabinet and all parts thereof, to be free from defects in
material or workmanship, when such unit is installed, used, and maintained in
accordance with provided instructions. The warranty period starts two weeks from
the date of shipment from Horizon Scientific, Inc. This two week period allows ample
shipping time so that the warranty will go into effect at approximately the same time
your equipment is delivered. Unless subject to prior written agreement with Horizon
Scientific, Inc., this warranty does not allow for any warranty start deferment greater
than two weeks from date of shipment due to a delayed installation and/or start-up.
By purchasing any product from Horizon Scientific, Inc., you and any entity for which
you are purchasing acknowledge and agree to each and every provision contained
herein, and all other Notices and Terms provided to Purchaser by Horizon Scientific,
Inc., which are hereby incorporated.
Under this warranty, Horizon Scientific, Inc., through its authorized service
organizations, will repair, or at its option, replace any part found to contain a
manufacturing defect in material or workmanship without charge to the owner for
parts and service labor. Replacement or repaired parts will be warranted for only the
unexpired portion of the original warranty. Horizon Scientific, Inc. will not assume any
shipping or cartage costs for parts under warranty. These costs shall be paid by the
customer.
ADDITIONAL COMPRESSOR WARRANTY
In addition to the standard warranty, Horizon Scientific, Inc. warrants its hermetically
and semi-hermetically sealed compressors to be free from defects in both material and
workmanship under normal use and service in addition to the standard warranty
period. Compressors determined by Horizon Scientific, Inc. to have been defective
within this extended time period will, at Horizon Scientific, Inc.'s option, be either
repaired or replaced with a compressor or compressor parts of similar design and
capacity.
The compressor warranty applies only to hermetically and semi-hermetically sealed
parts of the compressor and does not apply to any other parts or components,
including, but not limited to, cabinet, paint finish, temperature control, refrigerant,
metering device, driers, motor starting equipment, fan assembly or any other electrical
components.
Horizon Scientific, Inc.’s sole obligation under this warranty is limited to either repair
or replacement of parts, subject to the additional limitations below. This warranty
neither assumes nor authorizes any person to assume obligations other than expressly
covered by this warranty.
NO CONSEQUENTIAL DAMAGES. Horizon Scientific, Inc. is not responsible for
economic loss; profit loss; or special, indirect or consequential damages, including