This document is the property of AS POOL - NextPool group and cannot be reproduced or communicated without our authorisation.
9
9/14 - Installation instructions for an automatic safety cover
2.3.3 Fig. 24
Identify the hole positions by positioning the
fastening system opposite the openings in the slat.
Drill diameter 10 holes. Fix the part using the
supplied screws and then refit the cover.
Check that the fastenings are in working order.
Fig. 24
2.4 Selfeex fastening system
The Selfeex system is composed of a "lock" part
built into the first cover slat and a "wall hook" part
fixed to the pool wall.
The principle: when the cover approaches the pool
wall it pushes the lock which harpoons the wall
hook and thereby locks the pool.
Unlocking is by automatic lock release when the
cover is rolled.
2.4.1 Fig. 25
When the crate is opened, set aside the 3 first slats
fitted with the Selfeex units and the 2 slats that have
pre-cut notches.
Fig. 25
2.4.2 Fig. 26
Pass the straps into one of the two notched slats
and clip the second slat behind it.
Fig. 26
2.4.3 Fig. 27
Place the slats on the water and click exactly 30 slats
between the 3 slats with the Selfeex system and the
2 slats with straps.
x 30
Fig. 27
2.4.4 Fig. 28
Fix the remaining slats behind only adjusting the
slats needed to cover the entire surface of the water
when joined in the pool, any extra slats should be
put aside.
Fig. 28
