This document is the property of AS POOL - NextPool group and cannot be reproduced or communicated without our authorisation.
7
7/14 - Installation instructions for an automatic safety cover
2.2.3 Fig 15: Option for fixing the triggers on the levelling
course
Fix part ② on support ③ using the TFHC M
5 x 16 mm screws and the M5 nuts.
Then, assemble support ③ on levelling course plate
④ using the TFHC M 5 x 16 mm screws forming a
bracket.
Centre the whole on the harpoon, then correctly
flatten the support and the edge plate against the
pool wall and edge.
Mark out the holes and drill to a diameter of 8 mm
and depth of 35 mm.
Finally, fix using the TFHC M 6 x 30 mm screws and
M6 brass plugs.
The front face of the trigger is fixed on part ② using
the two TRPZ 4 x 16 mm screws.
Fig. 15
2.2.4 Fig. 16
Close the cover to connect the system.
Fig. 16
2.2.5 Fig. 17
Secure the pool by pressing on the trigger.
Fig. 17
2.2.6 Fig. 18
Before opening, press on the lug and pull simultaneously
upwards to remove the trigger.
Fig. 18
2.2.7 Fig. 19
Open the cover to disconnect the system.
Fig. 19
