This document is the property of AS POOL - NextPool group and cannot be reproduced or communicated without our authorisation.
4
Installation instructions for an automatic safety cover - 4/14
1.4 Controlling the fit
Fig. 7
Place the cover against a length of the pool. Check
that there is a gap greater than 2.5 cm between the
ends of the wings and the sides of the pool (needed
for operation) and less than 7 cm (otherwise the
cover is no longer compliant). 10, 20, 25 and 30 mm
wings are available on order.
2,5cm < x < 7cm
Fig. 7
1.5 Installing the stair slats
Fig. 8
Centre the stair cover in its housing and assemble
it to the rest of the cover by making a notch in the
double male hook on either side of the stairs in
order to leave the space for the cap on the base stair
slat.
Fig. 8
1.6 Slat orientation skid (above water models only)
Fig. 9
So that the slats unroll towards the opposite side
of the pool, place the orientation ski on the lower
face of the cover between the slat the furthest from
the roller and the next one after having flattened it.
Reshape it to its curved shape in order to raise the
first slat which drops down into the water in order
to ease the unrolling and prevent the cover from
going backwards.
Fig. 9
