Installation instructions for the OPEN SURF System and OPEN SURF System 2 above-water automatic slatted safety cover - 14/22
14
Marron
Bleu
M22 K10
+
-
+
-
Rouge
Noir
Bleu
Marron
M=
I
0
II
Schéma électrique Surf modèle filaire
1
2
3
4
Noir/blanc
Noir
Blue
Brown
Black
Red
Brown
Blue
Black
Black/white
M=
M22 K10
4.1.1 Fix the transformer box in the technical room.
Fig. 32
Connect the 230 V power supply cable in the electric
box to the terminal marked "T" for the earth, "P" for
the phase and "N" for the neutral.
Connect the two power wires of the connecting
cable to the terminals marked "+" and "-" in the box.
Fig. 32
230V AC
24V DC
ON / OFF
T N
+
-
P
2A
4.1.2 Connect the power cables to the screw terminal
inside the stand.
Fig. 33
Test the tube's rotation in both directions. The slats
should roll by passing over the roller shaft. If the
movement does not match to the correct direction,
invert the blue and brown wires
Let the tube turn in the unrolling direction until the
motor stops (unrolling limit switch stop).
Finish the adjustment of the limit switches once the
cover's slats have been assembled.
Fig. 33
Have the electric connections made by a qualified
technician in compliance with current standards.
4. Electric connections
4.1 Cabled model
OPEN SURF cabled model electric diagram.
