Abriblue BANC CLASSIC Скачать руководство пользователя страница 25

Страница: 25 / 32

3/10 - Safety instructions and user guide for the automatic pool cover

This document is the property of AS POOL - NextPool group and cannot be reproduced or communicated without our authorisation.

2. Slatted cover presentation

2.1 Automatic pool safety cover description

The automatic safety cover is composed of a floating

slat cover that unrolls and rolls around a motorised

roller shaft (above ground or immersed) that covers

the pool surface to prevent or authorise bathing.

Closure and opening takes about 3 minutes.

They are manufactured in compliance with the

NFP90-308 standard that imposes production

requirements to protect children from drowning

(especially protection from electric, entrapment and

ducking risks).

The unrolling and rolling shaft rotation uses a 12V or

24V DC drive gear motor powered by a 230V AC/24V DC

(or 230V AC / 12V DC) electric box located in the

technical space. Rotation speed is about 5 rpm. The

sound level generated by the automatic safety cover

when running is > 65 dB.

0UV. FERM.

The cover is controlled using a control that is locked

using a key or an access code placed in the immediate

pool vicinity.
Casing can cover the roller for a more aesthetic look or

to isolate the bathing area.
"Safety" systems are located at the ends of the slatted

cover to fix it to the pool when it is fully unrolled over

the pool to prevent access to the water.

2.2 Normal automatic pool cover use and

contra-indications

2.2.1

Normal automatic pool cover use
See table on page 4

2.2.2

Automatic pool cover use contra-indications
Do not attempt to roll in the cover without having

unlocked the fastening systems.
Do not roll in the cover if there are objects or people

on the cover.
Do not activate cover closure if there are floating

objects or people in the pool.
Do not touch the roller during rotation.
Do not stop the cover in an intermediate position

during the rolling or unrolling phase
Do not leave the key on the control station. Do not

disclose the phone locking key or eliminate the

presence of the code.

Содержание BANC CLASSIC

































Результаты поиска

Содержание BANC CLASSIC

Отзывы:

Похожие инструкции для BANC CLASSIC

Бренды по названию

Популярные бренды

Abriblue BANC CLASSIC, Руководство по установке

Результаты поиска

Содержание BANC CLASSIC

Отзывы:

Похожие инструкции для BANC CLASSIC

Бренды по названию

Популярные бренды