Abriblue BANC CLASSIC Скачать руководство пользователя страница 2

Страница: 2 / 32

Installation instructions for the OPEN SURF System and OPEN SURF System 2 above-water automatic slatted safety cover - 2/22

This manual is intended for the person who installs and commissions an ABRIBLUE slatted safety cover.

This manual must then be given to the pool owner along with the safety and user instructions so that it is available for subsequent use.

The advice given in this leaflet is the result of AS POOL’s experience in manufacturing automatic slatted covers since 1995.

It will allow users to make the best use of this product which should give compete satisfaction.

Compliant with the highest requirements, our safety cover was designed to prevent children younger than 5 years old from accessing

the pool when it is unrolled and locked.

CAUTION

The floating slatted safety cover is not a substitute for your common sense or your

responsibilities. It does not replace the vigilance of a responsible adult, which remains

the essential factor in the protection of young children.

FOREWORD

USEFUL ADDRESS

Your dealer (stamp):

Содержание BANC CLASSIC

































Результаты поиска

Содержание BANC CLASSIC

Отзывы:

Похожие инструкции для BANC CLASSIC

Бренды по названию

Популярные бренды

Abriblue BANC CLASSIC, Руководство по установке

Результаты поиска

Содержание BANC CLASSIC

Отзывы:

Похожие инструкции для BANC CLASSIC

Бренды по названию

Популярные бренды