above Height Series, Руководство пользователя

Страница: 10 / 80

4
1. Align the “ ” on the lower side of the “ Wind Sensor ” with the “ ” on the upper side
of the “ Control Board ”. Turn the wind sensor clockwise until the“ ” on the win sen-
sor aligns with “ ” on the control board.
3. Assembly
3.2 Turn on the Power on the Control Board
3.3 Connect the Wind Sensor to the Control Board
Control Board
1. Locate the control board.
2. Pull off the silicone cover in the center of the top of the Control Board.
Turn the power switch on the right side in the red box from off to on.
3. Push the silicone plug back into place.
ON
OFF
*Control board should come pre-attached
to the motor (top part of umbrella)