above Height Series, Руководство пользователя

Страница: 15 / 80

9
4. Remote Control
4.2 Pairing Your Remote
4.3 Pairing Your Remote Control to Multiple Umbrellas
1. Pull out the silicone plug in the center of the top of the Control Board.
Turn the power switch to on.
NOTE :If the switch is already turned on, please turn it off and then back on.
The umbrella will be in pairing mode for 30 seconds after turning the switch to on.
2. Press and hold the UP button ”▲“ on the remote control until the control board beeps.
This will indicate that the remote has successfully paired with the control board.
3. Gently press the silicone cover back into place.
1. A remote control can pair with multiple control boards (umbrellas) at the same time.
However, an umbrella can only pair with one remote control. If you pair your umbrella
with a new remote control, the previous remote will automatically be unpaired.
2. Select a remote that you would like to pair all the umbrellas with.
Control Board
ON
OFF