EN
9
• Starting/Stopping the Treadmill: Press the Start/ Stop button on the remote
control to Start or Stop theTreadmill. By Pressing Stop when you have finished your
session, the Treadmill will stop slowly and enter Standby mode. Press and hold the
Start/Stop button for more than 2 seconds to unlock the Treadmill.
Syncing your WalkSlim WalkPad 630 with the Remote Control
Your remote control is synced to the treadmill during manufacture so a re-sync is only
necessary if you are replacing the first remote with another one.
To re-sync your new remote control
1. Remove the battery cover on the backside of the remote control and take the battery
out of the remote and place it back in again into its correct position.
2. Switch the treadmill on by pressing the Start/Stop Button, once the display panel
is lit, press the Mode Switch Button.
If the re-sync is not successful, switch the treadmill off, and repeat steps 1 & 2 again.
Pairing the Remote Control to Bluetooth
Restart the treadmill and press and hold the Mode button on the remote control. A beep
sound indicates the success of pairing.
During operation, the remote control should always be close to the display screen of the
treadmill.
Starting the WalkSlim WalkPad 630 using the Automatic Mode (A)
This Automatic (3 Zone Sensor) Mode uses infrared induction
technology to automatically control and adjust the speed by
sensing the location of your feet according to the slow down,
speed up and constant zones on the tread belt.
It is an advanced mode that is suitable for those who have
strong sports skills or treadmill experience.
Plug in the power, turn on the power switch which is located on
the underside of the LED Display Screen.
Press the Mode button once on the Remote Control to switch
to the Automatic Mode. A will be displayed on screen in red.
Now you can control speed without use of the Remote Control.
HOW TO SPEED UP
Walk or run in the Speed Up Zone. The speed will gradually
increase until it reaches the max speed of 6km/h.
HOW TO MAINTAIN A CONSTANT SPEED
Walk or run in the Constant Zone to maintain a steady
uniform speed.
Speed Up
Zone
Constant
Zone
Slow Down
Zone
