EN
12
Troubleshooting
The treadmill is
not working
•
Make sure the power cord is properly secured into the power
outlet and that the switch is turned to the ‘ON’ position.
The tread belt is
not working
• Insufficient lubrication. Add silicone oil lubricant.
The tread belt is
slipping
•
Tread belt is too loose or too tight. Adjust the tread belt
tightness to the correct tension by turning both left and
right adjusting screws for half a cicle clockwise at the same
time. The tread belt should be able to be lifted from the base
by about 5-7.5cm by hand. If you feel there are occasional
pauses as you are walking normally, it means the belt has
become loose. Over time the tread belt will loosen due to
wear or stretching and an adjustment must be made.
The Treadmill
will not speed up
slow down
Please contact our Customer Service Centre.
The Display
Screen does not
work
Please contact our Customer Service Centre.
The Treadmill is
losing speed
Add lubricant oil to the underside of the tread belt as per
instructions of this manual.
Display Screen
is on but the
Treadmill does
not start
The treadmill has not been started according to the instructions
of this manual. If the treadmill still does not start please contact
our Customer Service Centre.
Unreadable
/ Incoherent
Display Screen
Motor is overheating. Turn the power off, unplug and leave for
one hour then restart. If it does not restart please contact our
Customer Service Centre.
