EN
7
Operating Instructions
STARTING YOUR WALKSLIM WALKPAD 630
1. First find the right spot for your WalkSlim WalkPad 630, ensuring you choose a
location that is flat and open, free of sharp objects, with a sufficient 1 metre clear
space around the treadmill.
2. Remove the WalkSlim WalkPad 630 from its packaging and place on the floor.
3. Unfold the WalkSlim WalkingPad 630 slowly and press it down completely flat.
4. Check and adjust the tread belt to make sure its centered.
5. Before you use the WalkSlim WalkPad 630 the tread belt must be lubricated with the
oil provided.
Note: Do not connect the power before the treadmill is fully unfolded and lubricated
HOW TO LUBRICATE THE TREAD BELT
• Lubricating your WalkSlim Walkpad 630 treadmill is essential before starting to use it
for the first time along with during normal use.
• During normal use, friction marks may appear between the tread belt surface and
the treadmill base. To avoid unnecessary friction and to maximize the life of your
treadmill, it is recommended to lubricate the tread belt surface with lubricant after
every 10-15 times or according to the following schedule:
– Lightweight users (less than 3 hours/week) – Lubricate once every 3 months
– Moderate users (3-6 hours/week) – Lubricate once every 2 months
– Heavyweight users (more than 7 hours/week) – once every month
The following is a step-by-step guide
1. Make sure the treadmill is unplugged and place it on an even, non-slippery surface.
2. Lay the treadmill down so its left side is facing up.
3. Lift the tread belt surface up starting from the upper corner.
