PROBOIL 2 to PROBOIL.2X Upgrade Installation Guide v1b
7
OR: Continue to use the PROBOIL2 tundish and drain hose (Not preferred option)
1.
Pull black rubber boiled water
outlet pipe (E2) from tundish (E3).
2.
Push silicone outlet tube (K) onto stem of
tundish (E3).
2.1.3
Install the new PROBOIL2X
PROBOIL2X
PROBOIL2X
PROBOIL2X replacement boiler
This drawing can be used for reference throughout the PROBOIL2X replacement process:
Key
Description
Drawing
A
PROBOIL.2X boiler unit
B
½” male boiler inlet (with
internal check valve)
C
3/8” male boiler outlet
D
mains power cable
E
¼” flexible blue inlet pipe
F
¼” x ¼” inlet pushfit
connector
G
½” blue Inlet “wingnut”
connector (with integral
“flat” rubber seal)
H
inlet connector meshed
filter seal
I
Outlet connector rubber
seal
J
3/8” red Outlet “wingnut”
connector
K
Silicone outlet tube (0.75M)
L
8mm barbed stem x 3/8”
male tap connector
M
2 x Wall fixing screws
N
2 x Wall fixing plugs
O
½” inlet transport cap
P
3/8” outlet transport cap
Q
3/8” female flexible
(braided/silicone) hose tap
connector assembly and
fibre seal (supplied with
tap)
