6
Rear Panel
Figure 2: Rear Panel
Power port
Connect the supplied power adapter here.
10/100BaseT
LAN port
Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
If required, any port can be connected to another hub. Any LAN port
will automatically function as an "Uplink" port when necessary.
Internet port
(10/100BaseT)
Connect the DSL or Cable Modem here. If your modem came with a
cable, use the supplied cable. Otherwise, use a standard LAN cable.
Reset Button
This button has two (2) functions:
•
Reboot
. When pressed within 3~5 seconds, the power LED
lights amber then released, the Wireless Router will reboot
(restart).
•
Clear All Data
. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1.
After Power On.
2.
Hold the Reset Button down.
3.
Keep holding the Reset Button more than 5 seconds, until the
Amber LED has flashed.
4.
Release the Reset Button. The Wireless Router is now using the
factory default values.
