26
IP Address/ Host
name
Enter the IP address or domain name that you want to ping.
Run
Click to start pinging.
Reset
Click to clear the current IP address /Host name.
DoS Setting
A
DoS
(Denial of Service) attack does not attempt to steal data or damage your PCs, but
overloads your Internet connection so you cannot use it - the service is therefore unavailable.
If DoS function is enabled, DoS attacks will be detected and blocked. The default is
unabled
.
It is strongly recommended that this setting be left enabled.
Enable DoS
Prevention
Check to enable the DoS prevention function. Select the item listed to
enable.
Enable Source IP
Blocking Block
Set the threshold for the frequency of packets that are allowed to pass
through. The default value is 50 packets per seconds. You can adjust the
value according to your need. It is recommended that you set a practical
