Abocom WAP5502, Руководство пользователя

Страница: 43 / 77

Chapter 4: Web Configuration
40
If the L2TP be selected, user have to set up the server IP address, user
name and password according to the ISP that provided the related
information.
IP Address: Enter the WAN IP address provided by your ISP here.
Subnet Mask: Enter the subnet mask here.
Server IP Address: Enter the L2TP Server IP Address in this column.
User Name: Maximum input is 20 alphanumeric characters (case
sensitive).
Password: Maximum input is 32 alphanumeric characters (case
sensitive).
Connection Type : Select the connection type Continuous , Connect on
Demand or Manual from the pull-down menu. If selected Manual user
can click Connect button to make a connection.
Idle Time : It represents that the device will idle after the minutes you
set. The time must be set between 1~1000 minutes. Default value of idle
time is 5 minutes. This function will be available when the
Connection
Type is selected to Connect on Demand .
MTU Size: The most appropriate MTU (Maximum Transmission Unit)
namely the maximum packet size, the default value is 1460 for your
application. Reducing the packet size can help connecting to certain web
sites or speeding up packet transfer rate. If the incorrect packet size is
entered, you may not be able to open certain web sites.
Attain DNS
Automatically
Set DNS
Manually
DNS 1
DNS 2
DNS3
Select to Attain DNS Automatically or select Set DNS Manually to
set the DNS server IP address at the following DNS 1~3 columns.
Default setting is
Attain DNS Automatically .
Enter the DNS server IP address(es) provided by your ISP, or you can
specify your own preferred DNS server IP address(es).
DNS 2 server is optional. You can enter another DNS server’s IP
address as a backup. DNS 2 server will be used when the DNS 1 server
fails.
Clone MAC
address
Your ISP may require a particular MAC address in order for you to
connect to the Internet. This MAC address is the PC’s MAC address
that your ISP had originally connected your Internet connection to. Type
in this Clone MAC address in this section to replace the WAN MAC
address with the MAC address of that PC.
Enable uPNP… Check to enable the listed functions.
Apply Changes
After completing the settings on this page, click Apply changes button
to save the settings.
Reset
Click Reset to restore to default values.