Abocom WAP5502, Руководство пользователя

Страница: 27 / 77

Chapter 4: Web Configuration
24
Beacon Interval
Beacon Interval is the amount of time between beacon transmissions.
Before a station enters power save mode, the station needs the beacon
interval to know when to wake up to receive the beacon. Range 20-1024 ms,
default is 100.
Preamble Type A preamble is a signal used in wireless environment to synchronize the
transmitting timing including Synchronization and Start frame delimiter.
You can select Long or Short for the preamble type.
IAPP
Select Enabled or Disabled to execute this function.
Protection
Select Enabled or Disabled to execute the security function.
Aggregation
Select Enabled or Disabled to execute this function.
Short GI Select Enabled or Disabled to execute this function.
WLAN Partition
Select Enabled or Disabled to execute this function.
STBC
Select Enabled or Disabled to execute this function. The default is Disabled.
20/40MHz
Coexist
Select Enabled or Disabled to execute this function. The default is Disabled.
RF Output Power
Select the transmitting power rate 100%, 70%, 50%, 35%, 15%.
Security
Security
Mode
Select desired security type from the pull-down menu Disable, WEP, WPA,
WPA2 and WPA2-Mixed . The default setting is Disable . It is strongly
recommended to set up security mode (WEP, WPA, WPA2 and WPA2-Mixed) to
prevent any unauthorized accessing.
Note:
WPA and WPA-PSK only support TKIP and AES as encryption method.
Shared Key only supports WEP as encryption method.
AUTO(Open/Shared) means AP can accept STA connect to it using OPEN-
WEP or SHARED-WEP.